|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-29-2017, 04:31 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 6
|
Reviving black trim oxyded by the sun
Hello all,
Would very appreciate experienced member to recommand best product. Regards, Tks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-29-2017, 04:40 PM | #2 |
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: Reviving black trim oxyded by the sun
Any "product" is just going to be a mask as it will not actually bring the black back to the surface.
You can use a heat gun which will in fact bring the black back to the surface. It will also last quite some time (over a year since my last heat gun redo) This video is of my step pads on my truck. It's amazing to see it bring the black back to the surface. After that you can use a product or not. I don't use a product on my step pads because it would make the pad slippery when wet. Still looks black after 2 years and no product. |
06-29-2017, 05:08 PM | #3 |
Not Yet Wild
Join Date: Jun 2017
Posts: 6
|
Re: Reviving black trim oxyded by the sun
Cool TY
|
06-29-2017, 05:25 PM | #4 |
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: Reviving black trim oxyded by the sun
The heat treatment will give the best and longest lasting results.
Once you've got it lookin good, use a UV protectant to keep it lookin good. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reviving a 2002 cart | Electric EZGO | |||
Reviving bad batteries | Electric EZGO | |||
Black Trim Finish on Precedent | Electric Club Car | |||
Black plastic trim cure | Design Center | |||
black trim for seat | Gas EZGO |