|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-19-2017, 12:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2017
Posts: 50
|
1996 36v cables getting hot
I have 1996 ezgo 36volt and after riding it for about 10 to 15 mins yesterday I smelt something and looked under the seat and found the cables on the batteries was hot and the cables on the solenoid are hot the cables on fwd rev switch was not hot I was wondering if anybody would know off the top of their head what it would be
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-19-2017, 01:40 PM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 36v cables getting hot
High current cables getting hot is due to excessive resistance in the cable or connection and any cable that gets more than about 10°F above air temperature needs to be repaired or replaced.
Cable connections on the battery terminals are very susceptible to corrosion and the corrosion wicks into the cable itself, causing additional problems. All 13 (or 14) high current cables ought to be 4Ga or thicker. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replacing battery cables, which size replacement cables to make? | Electric EZGO | |||
| 1996 EZGO TXT Electric Cables | Electric EZGO | |||
| what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
Linear Mode
