2000 TXT 36v won’t move, solendoid wont click

scottyb · 06-20-2018, 09:08 AM

I agree, the solution could be as simple as a reed switch bypass

TxOutlaw · 06-20-2018, 01:10 PM

I was thinking also, when I was checking the small white wire, I was grounding to a battery neg post, not the where the neg wire comes off the pack or the charge port. That may be why I got 6v and not 36? Anyway. Still pouring here, will check all these locations when the weather clears! Thanks again for all the help!

TxOutlaw · 06-20-2018, 07:52 PM

Update.

I have 36v to reed/charge recept., both FR micros, key ignition both legs... then nada at the 4 pin MS3 behind the FR switch... not green white or red... pedal engaged. guess I am taking out the floor board and looking for a broken green wire. Lol

scottyb · 06-21-2018, 07:22 AM

Quote:

Originally Posted by TxOutlaw

Update.

I have 36v to reed/charge recept., both FR micros, key ignition both legs... then nada at the 4 pin MS3 behind the FR switch... not green white or red... pedal engaged. guess I am taking out the floor board and looking for a broken green wire. Lol

Good diagnosis. There is another ms in the pedal box

TxOutlaw · 06-21-2018, 07:55 AM

Thanks Scotty. I guess I need to take the silver running boards off the floorboard sides then the mat will come up?? Obviously can’t get to it under the cart... thanks again!

kgsc · 06-22-2018, 09:50 AM

Green wire comes from the key switch to the pedal switch. Should be a gray harness coming out of the pedal box with a white 4 pin molex plug. Green wire there came from the key. Should have pack voltage. Red should have voltage when the pedal is pushed.

TxOutlaw · 06-22-2018, 02:06 PM

Ok I had it backwards, no wonder there’s no voltage at that 4 pin molex I found. I bet I need a MS at the pedal box. Will confirm this weekend! Thanks!

TxOutlaw · 06-24-2018, 04:06 PM

Ok I got to the pedal switch. No voltage to green or red side. Shouldn’t I have power to green since it’s coming from ignition?

Thanks!

kgsc · 06-24-2018, 09:32 PM

Quote:

Originally Posted by kgsc

Green wire comes from the key switch to the pedal switch. Should be a gray harness coming out of the pedal box with a white 4 pin molex plug. Green wire there came from the key. Should have pack voltage. Red should have voltage when the pedal is pushed.

If you have power at the green wire at the key switch but not at the molex there is a bad wire in the harness.

TxOutlaw · 06-25-2018, 01:15 PM

Ok, so it it’s green from ignition to molex, green from molex to pedal switch, turns red from pedal switch back to molex, stays red to the solenoid. Am I understanding that right?

06-20-2018, 01:10 PM	#12
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click I was thinking also, when I was checking the small white wire, I was grounding to a battery neg post, not the where the neg wire comes off the pack or the charge port. That may be why I got 6v and not 36? Anyway. Still pouring here, will check all these locations when the weather clears! Thanks again for all the help!
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

06-20-2018, 07:52 PM	#13
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click Update. I have 36v to reed/charge recept., both FR micros, key ignition both legs... then nada at the 4 pin MS3 behind the FR switch... not green white or red... pedal engaged. guess I am taking out the floor board and looking for a broken green wire. Lol
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

06-21-2018, 07:55 AM	#15
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click Thanks Scotty. I guess I need to take the silver running boards off the floorboard sides then the mat will come up?? Obviously can’t get to it under the cart... thanks again!
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

06-22-2018, 09:50 AM	#16
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,120	Re: 2000 TXT 36v won’t move, solendoid wont click Green wire comes from the key switch to the pedal switch. Should be a gray harness coming out of the pedal box with a white 4 pin molex plug. Green wire there came from the key. Should have pack voltage. Red should have voltage when the pedal is pushed.

06-22-2018, 02:06 PM	#17
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click Ok I had it backwards, no wonder there’s no voltage at that 4 pin molex I found. I bet I need a MS at the pedal box. Will confirm this weekend! Thanks!
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-24-2018, 04:06 PM	#18
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click Ok I got to the pedal switch. No voltage to green or red side. Shouldn’t I have power to green since it’s coming from ignition? Thanks!
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

06-25-2018, 01:15 PM	#20
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23	Re: 2000 TXT 36v won’t move, solendoid wont click Ok, so it it’s green from ignition to molex, green from molex to pedal switch, turns red from pedal switch back to molex, stays red to the solenoid. Am I understanding that right?
TxOutlaw Not Yet Wild Join Date: Aug 2016 Posts: 23

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
96 club car ds solenoid wont click and cart wont move unless you jump solenoid	Electric Club Car
1995 EZGO click but wont move	Electric EZGO
2000 EZ GO TXT wont move	Electric EZGO
2002 TXT Series no Solonoid Click Wont Move F or R	Electric EZGO