Programming for Danaher?

[bronsonj]

You can also opt for the Alltrax controller sold by ScottyB. I just put one in my TXT48 and it was a pretty straight forward process. I got the 300 amp one (the baby one) because I didn't need more power but I needed the ability to program my curves and low voltage cutoff for the lithium batts. I love the setup on my current cart with that controller and the lithium batteries.

Good luck.

[Billynjuls]

Originally Posted by delete1616

I posted a video some months back on installing the 600 amp Navitas in a Danaher cart and it was very simple and straightforward. Probably took less than 2 hours start to finish. If I wouldn't have tried to film it I could have done it less than an hour.

Would also love to see the video. Mine should be here in a few days. Where did you mount the OTF box? Also, is the resistor wire the long gray one? Thanks for any help.

[Billynjuls]

Originally Posted by bronsonj

You can also opt for the Alltrax controller sold by ScottyB. I just put one in my TXT48 and it was a pretty straight forward process. I got the 300 amp one (the baby one) because I didn't need more power but I needed the ability to program my curves and low voltage cutoff for the lithium batts. I love the setup on my current cart with that controller and the lithium batteries.

Good luck.

Unfortunately, it only works with TXT and not my RXV.

[delete1616]

https://www.youtube.com/watch?v=QyDmoWYSYJk

https://www.youtube.com/watch?v=JaNwXlXHXjg
Here are the install and 0-21mph vids

[Billynjuls]

Originally Posted by delete1616

https://www.youtube.com/watch?v=QyDmoWYSYJk

https://www.youtube.com/watch?v=JaNwXlXHXjg
Here are the install and 0-21mph vids

Thank you. Where did you mount the OTF programmer?

[BobBoyce]

Originally Posted by bronsonj

You can also opt for the Alltrax controller sold by ScottyB. I just put one in my TXT48 and it was a pretty straight forward process. I got the 300 amp one (the baby one) because I didn't need more power but I needed the ability to program my curves and low voltage cutoff for the lithium batts. I love the setup on my current cart with that controller and the lithium batteries.

Good luck.

There is no Alltrax option for the Danaher RXV.

[delete1616]

Originally Posted by Billynjuls

Thank you. Where did you mount the OTF programmer?

I currently have my OTF mounted in the driver's side glove box 👍

[jkredman]

Originally Posted by BobBoyce

There is no Alltrax option for the Danaher RXV.

Welcome back to the forum

I was beginning to worry about you. Especially given how exhausted you were when you gave me my curtis controller programming lesson.

Keith


Sent from my iPhone using Tapatalk

[BobBoyce]

Thank you. I ended up with Pneumonia. Still coughing and trying to recover.

[MCJEFE]

Crap Bob I didn't realize that you were sick! Would've waited to send my controller up to you. I dropped it off yesterday and it supposed to arrive Saturday. No hurry, take care of yourself and get well!

Sent from my SM-G960U using Tapatalk