|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-11-2019, 08:00 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 2
|
Ezgo has reverse but no forward
I got a 94 ezgo txt series golf cart. I have just recently replaced the solenoid, new cables, new f/r switch and controller. Batteries are only a few months old and fully charged. I have reverse but only clicks the solenoid when in forward. I have doubled checked my wiring and made sure the contacts looked good on the new f/r switch...I also switched the 2 cables at 3 'o'clock and 9 o'clock and it then goes forward while switched in reverse, but nothing when switched to reverse but clicking. What am I missing!? Thanks!!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-15-2019, 07:39 AM
|
#2 |
|
Gone Wild
 Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo has reverse but no forward
In a series cart, when this happens, it is almost always the forward and reverse switch, or the high current cables going to the switch.
Sent from my SM-G930R4 using Tapatalk |
|
|
|
|
04-15-2019, 09:15 AM
|
#3 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ezgo has reverse but no forward
My vote is the bracket the FNR is mounted on needs adjustment. The bolt holes are slotted to allow adjustment. I'm guessing it's failing to go all the way to the forward stop.
|
|
|
|
|
04-15-2019, 12:52 PM
|
#4 | |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: Ezgo has reverse but no forward
Quote:
 |
|
|
|
|
|
04-15-2019, 02:03 PM
|
#5 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ezgo has reverse but no forward
Here's a bad pic. When I did mine, I rotated the FNR to exactly Neutral, and slid it back and forth until the handle was exactly straight up.
|
|
|
|
|
04-15-2019, 09:03 PM
|
#6 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Ezgo has reverse but no forward
Sounds like to me you have the cam 180 out. It only goes in one way to work both directions but you can install it on the shaft any way you want.
By your own description sounds like it's out!  |
|
|
|
|
04-20-2019, 07:33 PM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 2
|
Re: Ezgo has reverse but no forward
Thanks for the input guys, turns out it was actually a loose connection on one of the brush studs in the motor.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
| My ezgo is going forward in forward and reverse | Electric EZGO | |||
| Wtb ezgo gas forward reverse set up | Golf Carts and Parts | |||
| 2006 ezgo forward is reverse and reverse is forward please help | Electric EZGO | |||
| Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Linear Mode
