|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-02-2019, 07:01 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Location: Minnesota
Posts: 9
|
88 Ezgo driven clutch cover
Can anyone tell me what size bolts hold the dust cover onto the driven clutch? I’m on my second rescue cart project and I have found many many answers to my questions on this forum. I don’t plan to use the governor. Just adding the cover. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-18-2019, 09:46 AM | #2 |
Not Yet Wild
Join Date: Oct 2019
Posts: 1
|
Re: 88 Ezgo driven clutch cover
I've just done an '84 for a guy and his new clutch was not tapped nor did his cover come with screws.
I found that a 10/24 tap worked well with some really short screws.Hope this helps.. |
01-05-2020, 07:33 PM | #3 |
Not Yet Wild
Join Date: Oct 2018
Location: Minnesota
Posts: 9
|
Re: 88 Ezgo driven clutch cover
Perfect. Awesome suggestion. I will check it out in the Spring!
|
Tags |
driven clutch, ezgo |
|
|
Similar Threads | ||||
Thread | Forum | |||
Screw size for driven clutch cover | Gas EZGO | |||
Driven clutch dust cover very close to engine air cover | Gas EZGO | |||
Driven clutch dust cover - necessary? | Gas EZGO | |||
driven clutch cover rubbing | Gas EZGO | |||
driven clutch cover | Gas EZGO |