|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-13-2020, 11:40 PM | #1 |
Not Yet Wild
Join Date: Jan 2020
Posts: 3
|
hei ignition on 98 ezgo?
i have seen post about hei conversion . i cant get spark at plugs now and considering the change. how do you go from one plugwire on an old chevy coil to two plugs? and would this be a good upgrade?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-14-2020, 09:24 PM | #2 |
Not Yet Wild
Join Date: Jan 2020
Posts: 3
|
Re: hei ignition on 98 ezgo?
i found atv or motorcycle coils with two plug wires 4 to 5 ohms. would that work? fire at same time.
|
01-15-2020, 02:10 AM | #3 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: hei ignition on 98 ezgo?
https://www.youtube.com/watch?v=pfrWP-yR5G0
Works fine!! Only thing I don't know is to use straight copper or resistor wire? |
01-15-2020, 05:43 AM | #4 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: hei ignition on 98 ezgo?
If you notice in the comments, he only changed the coil. He used the original ignitor. Not many people have made the true conversion work.
|
01-15-2020, 09:25 AM | #5 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: hei ignition on 98 ezgo?
I dont know of anybody that has made the conversion work. He is using the stock ignitor and just swapped the coil.
But generally, a coil is a coil. It takes power and a ground pulse and converts that to a spark. As long as it makes a spark thats its only purpose. The magic all happens in the ignitor on these. If your ignitor is good, you're set go ahead. I just put my 2007 back together but the MCI coil was cut up. Didnt want to spent a bunch of money on a coil.for a motor that may not work but I had a spare pre-MCI coil laying around. It works perfectly fine and runs great! I just cant mount it becauae the wires are too short, so for now a zip tie works. May have to try this GM coil just for fun though. If it works then great! If not I had planned in buying the right coil anyway. If your ignitor is shot I do have a couple extras |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Ignition Switch Help (where to connect hot wire on Radio to Ignition Switch) | Gas EZGO | |||
Non EZGO ignition coil? | Gas EZGO | |||
88 ezgo ignition problem | Gas EZGO | |||
ezgo ignition | Gas EZGO | |||
Universal EZGO TXT ignition key? | Gas EZGO |