Another G1 redo

Shadow3.0 · 01-13-2021, 08:13 AM

So I bought this old G1 to redo and planning to hop up the motor while rebuilding it.
Got lots of input off the site thanks to Slonomo
89 Marathon
Mikeasis
and A FEW OTHERS.
First off I installed 400ex shocks to raise the rear.
Building the front lift now.
The cylinder was bored to 72 mm for a phazer 485 piston.
The port work was heavily modded. Exhaust port came up to 88 degrees. and was widened to 46 mm.
The intake boost port was widened by 6 mm.
I have a comet copy clutch. I lightened 3 of the weights total weight 257 gm. Hoping for an engagement speed around 2800 rpm.
Motor is tore down ready for new crank bearings.
Body was raptor linered in dark silver grey.

Shadow3.0 · 01-13-2021, 08:28 AM

First pics
The body was raptor linered20210111_111456.jpg

20210111_111450.jpg

Cartmaster · 01-13-2021, 08:38 AM

Keep the pictures coming. We like pictures! LOTS of them.

Shadow3.0 · 01-13-2021, 02:13 PM

4" lift. Just gotta mount shocks and adjust toe20210113_101109.jpg

20210113_101116.jpg

slonomo · 01-13-2021, 05:37 PM

Lookin good!

Shadow3.0 · 01-13-2021, 08:33 PM

Slonomo
I dismantled that clutch and lightened 3 pucks. Total weight 254 grams. With the black spring. Hopin im close.

Shadow3.0 · 01-13-2021, 08:35 PM

Looking for engagement around 2800.

slonomo · 01-14-2021, 08:15 AM

Did you take a look at the Comet Duster chart?

Shadow3.0 · 01-14-2021, 10:12 AM

Yes. Ty

Shadow3.0 · 01-14-2021, 10:22 AM

Little work today
Lift installed20210114_084154.jpg

20210114_084144.jpg

01-13-2021, 08:13 AM	#1
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Another G1 redo So I bought this old G1 to redo and planning to hop up the motor while rebuilding it. Got lots of input off the site thanks to Slonomo 89 Marathon Mikeasis and A FEW OTHERS. First off I installed 400ex shocks to raise the rear. Building the front lift now. The cylinder was bored to 72 mm for a phazer 485 piston. The port work was heavily modded. Exhaust port came up to 88 degrees. and was widened to 46 mm. The intake boost port was widened by 6 mm. I have a comet copy clutch. I lightened 3 of the weights total weight 257 gm. Hoping for an engagement speed around 2800 rpm. Motor is tore down ready for new crank bearings. Body was raptor linered in dark silver grey.
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-13-2021, 08:28 AM	#2
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo First pics The body was raptor linered20210111_111456.jpg 20210111_111450.jpg
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-13-2021, 08:38 AM	#3
Cartmaster British born Nincompoop Join Date: Feb 2007 Location: United Kingdom Posts: 2,463	Re: Another G1 redo Keep the pictures coming. We like pictures! LOTS of them.

01-13-2021, 02:13 PM	#4
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo 4" lift. Just gotta mount shocks and adjust toe20210113_101109.jpg 20210113_101116.jpg
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-13-2021, 05:37 PM	#5
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,442	Re: Another G1 redo Lookin good!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-13-2021, 08:33 PM	#6
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo Slonomo I dismantled that clutch and lightened 3 pucks. Total weight 254 grams. With the black spring. Hopin im close.
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-13-2021, 08:35 PM	#7
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo Looking for engagement around 2800.
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-14-2021, 08:15 AM	#8
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,442	Re: Another G1 redo Did you take a look at the Comet Duster chart?

01-14-2021, 10:12 AM	#9
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo Yes. Ty
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

01-14-2021, 10:22 AM	#10
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64	Re: Another G1 redo Little work today Lift installed20210114_084154.jpg 20210114_084144.jpg
Shadow3.0 Not Yet Wild Join Date: Dec 2020 Posts: 64

Similar Threads
Thread	Forum
Redo on the 92 ds	Lifted Golf Carts
Redo G2	Electric Yamaha
Just picked up my 5th G1 Time to redo her	Gas Yamaha
G8 Redo Part II	Gas Yamaha
My G8 Redo.....	Gas Yamaha