lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-16-2010, 10:25 PM   #1
CamoCart
Not Yet Wild
 
CamoCart's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Birmingham, Alabama
Posts: 64
Default 2 inch receiver hitch for 2005 Ezgo TXT

Looking for someone that sells a 2 inch receiver hitch for 2005 ezgo txt with a rear seat kit on it. Do not want pay a ton of money. The company that sells the beast ezgo has one but it only fits their rear seat kit.
CamoCart is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-17-2010, 08:00 AM   #2
THUNDERBASES
Getting Wild
 
THUNDERBASES's Avatar
E-Z-GO
 
Join Date: Aug 2008
Location: B'HAM, Alabama
Posts: 137
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Noticed you from Birmingham also. There is a place in Bessemer that sells tubing that you could make one yourself. All you need is a piece of tubing with a couple of flanges welded to it. I have not looked under neath the cart but it does not sound like it would be hard to do. You would have to make it so it sticks out past the rear seat platform.
THUNDERBASES is offline   Reply With Quote
Old 09-17-2010, 08:12 AM   #3
SpoiledRotten
Conservatively Wild
 
SpoiledRotten's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

I'm fixing to make one for mine. You can use a piece of 2x2 angle iron long enough to bolt across the 2 or 3 bolts just under the bumper, where the 2 rear seat supports come through. Weld an 18" reciever tube that you can buy from Harbor Freight for about $19.00 and weld a small piece of flat bar across the tube in order to bolt in the two holes out at the end of the rear step for a little added support. Seems like it will be a piece of cake.
SpoiledRotten is offline   Reply With Quote
Old 09-17-2010, 08:14 AM   #4
SpoiledRotten
Conservatively Wild
 
SpoiledRotten's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Double post...
SpoiledRotten is offline   Reply With Quote
Old 09-17-2010, 09:03 AM   #5
CamoCart
Not Yet Wild
 
CamoCart's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Birmingham, Alabama
Posts: 64
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Thanks for the reply. Sounds pretty easy but will need to get someone to weld the parts for me as I have never welded before.
CamoCart is offline   Reply With Quote
Old 09-17-2010, 10:49 AM   #6
SpoiledRotten
Conservatively Wild
 
SpoiledRotten's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

You could get it all measured and cut. I'd almost bet that any welding shop would slap it together for less than $20.00. That's an inexpensive receiver! Less than $45.00. You can always find a piece of angle and flat bar lying around somewhere.
SpoiledRotten is offline   Reply With Quote
Old 09-20-2010, 01:40 PM   #7
THUNDERBASES
Getting Wild
 
THUNDERBASES's Avatar
E-Z-GO
 
Join Date: Aug 2008
Location: B'HAM, Alabama
Posts: 137
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Camo Cart, pm me and I can help you out with that. I live in your area. TB
THUNDERBASES is offline   Reply With Quote
Old 09-21-2010, 10:07 PM   #8
CamoCart
Not Yet Wild
 
CamoCart's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Birmingham, Alabama
Posts: 64
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

I went and got the receiver from harbor freight and angle iron and have fabricated the hitch. I spent $18 on the receiver and $5 on the angel iron. I have a guy welding it tomorrow for around $20.00. I will post pics once I get it back later in the week. Thanks for the help. Also, thanks for the offer to help Thunderbases. Roll Tide Roll!!!!!!
CamoCart is offline   Reply With Quote
Old 09-22-2010, 06:45 AM   #9
SpoiledRotten
Conservatively Wild
 
SpoiledRotten's Avatar
E-Z-GO
 
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Good for you. I also purchased the receiver tube yesterday. I'm going to be putting the weld to mine shortly. Make sure you post the pics of yours. Good luck.
SpoiledRotten is offline   Reply With Quote
Old 09-23-2010, 11:18 AM   #10
THUNDERBASES
Getting Wild
 
THUNDERBASES's Avatar
E-Z-GO
 
Join Date: Aug 2008
Location: B'HAM, Alabama
Posts: 137
Default Re: 2 inch receiver hitch for 2005 Ezgo TXT

Glad you found what you needed. Hope it turns out well. You are welcome.

Oh ,,,,,


ROLL TIDE ROLL!!!!!!!
THUNDERBASES is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Receiver Hitch for EZGO with rear flip seats Design Center
Ezgo rear bumper & receiver hitch Golf Carts and Parts
Need to add a 2" Hitch Receiver to 09 ST Gas EZGO
Receiver Hitch Cooler Rack Design Center
Drive receiver hitch Gas Yamaha


All times are GMT -5. The time now is 09:08 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.