|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-02-2010, 01:51 PM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 44
|
Intermittent cutout on 96 cc
I have a 96 cc, 48 volts, i have soldered the wire plug from the acc. Pedal potentiometer and this corrected the problem. I was thinking of putting in the update mcor kit and was wondering if anyone has done it and does it work o/k and where can i purchase it at a good price.i know buggies unlimited has it but i can never get an answer from them on e-mail anytime i e-mail them about this....bob
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2010, 05:51 PM | #2 |
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: Intermittent cutout on 96 cc
During the 1995-997 period there were several different Potentiometer units used. One is no longer available and other costs ( if still available ) is almost as much as conversion to MCOR? The conversion to MCOR is dependant on which pedal casting you have? I have found that during the same period Club Car used 2 different castings that were shaped different and only the one that curves forward at bottom and using large coil spring will work with MCOR kit.
When looking for parts always go to our forum sponsors first for best deals. parts are also available from any Club Car dealer |
|
|
Similar Threads | ||||
Thread | Forum | |||
Floor Mat Templete- cutout | Electric Club Car | |||
'97 48V Battery light on intermittent & won't charge intermittent | Electric Club Car | |||
intermittent no go | Electric EZGO | |||
Cushman low speed cutout | Electric golf carts | |||
Intermittent 95 CC | Electric Club Car |