|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-30-2008, 03:17 AM | #11 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
Once I read your post again I would said that I had DCS. I'll check it again today but I think that it still moved forward even with the reverse microswitch unplugged and the indicator was in reverse. My brother has one that works fine so I am going to do some checks on his also today.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-30-2008, 06:29 AM | #12 |
Just me. .
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
Re: 98 EZGO No Reverse
If that is the problem to the way to make it reverse would be to jump the two wires going into the micro switch.. The reverse buzzer should not work either if that is the issue.
|
05-30-2008, 03:28 PM | #13 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
The reverse buzzer is unplugged it buzz all the time. The check both micro switches today and they are good. Is that some kind of controller or computer that the wires from the f/r switch goes to?
|
05-31-2008, 12:39 AM | #14 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
Are there contacts inside the cam operated F/R switch? The more I read from this forum it sounds like the microswitch and F/R switch are two different switches.
|
05-31-2008, 09:01 AM | #15 | |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 98 EZGO No Reverse
Quote:
On a DCS type cart the controller does the switching. The reversing is controlled by the switches. Sounds like you have a DCS, Either the wiring, the F/R rocker switch or micro is bad. If it was working fine before and you haven't made any changes to the wiring I would start with the F/R rocker switch. |
|
05-31-2008, 02:08 PM | #16 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: 98 EZGO No Reverse
Good points here, BUT a DCS controller DOES know if it is forward or reverse. There are many things that could be wrong, i.e. micro switches, but the controller CAN have an effect on forward or reverse. I have even had troubles with NEW controllers only working in a single direction in our shop. Your best fix is to take it somewhere that has experience with them if the information posted here doesn't assist you...
|
|
|
05-31-2008, 04:16 PM | #17 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
Well the microswitches are fine. I have something else wrong. Probably the controller that you'all have been talking about. How do you check it?
|
05-31-2008, 04:20 PM | #18 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
O yeah no one answered my question on whether or not the microswitch and f/r switch are the same.
|
05-31-2008, 04:28 PM | #19 | |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 98 EZGO No Reverse
Quote:
MM is right...some things are extremely hard to diagnose and need dealer attention, they have special diagnostic tools general joe can't get. Harder to diagnose something over the pages of a website. People read into things in different ways. Anyone who owns a sparky needs to own a Volt/Ohm meter. Extremely helpful in diagnosing problems. |
|
05-31-2008, 04:37 PM | #20 |
Not Yet Wild
Join Date: May 2008
Posts: 19
|
Re: 98 EZGO No Reverse
Where is the F/R switch located?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Problems with 84 ezgo gasser wont go forward or reverse! | Gas EZGO | |||
1994 Ezgo electric runs great in reverse but does not forward | Electric EZGO | |||
1991 EZGo Electric: Reverse Doesn't Work? | Electric EZGO | |||
80 electric ezgo with no reverse | Electric EZGO | |||
Mid 90 EZGO will reverse but not go forward | Electric EZGO |