|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-12-2014, 07:58 AM | #11 |
Gone Wild
Join Date: Jan 2009
Location: North Topsail Beach, NC
Posts: 231
|
Re: Swaping motors on 2000 ez go
JohnnieB....The studs on the 98 are the same....Like all others that I have seen...controller has a 4 pin connector
The 2000 has different size studs....my mistake describing them..two studs are taller and two are shorter....but same size...the two shorter studs go from the motor to two plug in on the controller...this controller also has a 10 pin connector...and also a 4 pin connector that is jumped back to the same plug.... I was trying to save a lady in the campground some money but I am thinking that if this swap was even possible that its not gonna be worth all the trouble...Would you agree.. plus I have another post on CC side reference to my precedent not taking a charge.....jump over there and help please sir thanks Bill |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-12-2014, 09:24 AM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Swaping motors on 2000 ez go
Quote:
Also looks like you got the CC battery charging problem fixed. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
GE and ADC motors | Electric Club Car | |||
Swaping F&R handle with contactor | Electric EZGO | |||
swaping a yamaha rear axel with a clubcar | On Road Golf Carts! | |||
question about the body swaping | Electric EZGO | |||
Swaping In A 440 Snowmobile Engine | Big Block Talk! |