03-22-2009, 09:42 AM | #1 |
Not Yet Wild
Join Date: Mar 2009
Location: south carolina
Posts: 16
|
pulser coil
hey new here. I have a 86 marathon with a 2 cycle ,pulser coil is bad i havent ever pulled a fly wheel, is it difficult to do ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-22-2009, 09:59 AM | #2 |
Not Yet Wild
Join Date: Dec 2008
Location: Riverview FL
Posts: 32
|
Re: pulser coil
Not bad if you have the right tools
A three prong puller is a must I broke a flywheel in half once Using a two prong puller fortunately it was on a lawnmower And not my cart….. Bill. |
03-22-2009, 11:23 AM | #3 |
Not Yet Wild
Join Date: Mar 2009
Location: south carolina
Posts: 16
|
Re: pulser coil
thanks for reply. where would i find a 3 prong puller?
|
03-22-2009, 11:32 AM | #4 |
Not Yet Wild
Join Date: Dec 2008
Location: Riverview FL
Posts: 32
|
Re: pulser coil
Napa has them or any auto parts store
Wall mart may be the cheapest Or if you could borrow one that’s even better Bill. |
03-22-2009, 11:36 AM | #5 |
Not Yet Wild
Join Date: Mar 2009
Location: south carolina
Posts: 16
|
Re: pulser coil
thanks i will check there
|
03-22-2009, 01:06 PM | #6 |
Not Yet Wild
Join Date: Jul 2008
Location: Gleason, WI
Posts: 14
|
Re: pulser coil
Hey, big dave...If you haven't already ordered your pulsar coil, here's the best deal I found on one. It says it's for a 3pg only, but it worked beautifully on a 2pg. Good luck: http://www.golfcarcatalog.com/catalo...d=1678&id=5423
|
03-25-2009, 08:55 AM | #7 |
Not Yet Wild
Join Date: Mar 2009
Location: south carolina
Posts: 16
|
Re: pulser coil
thank you jumbotron1 for the info
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
ez-go coil | Golf Carts and Parts | |||
G1 Pulser coil | Gas Yamaha | |||
Pulsar coil | Gas EZGO | |||
need a coil for a 81 G-1 | Golf Carts and Parts |