Quote:
Originally Posted by Bosstin87
Paper clip trick did nothing.
I had a solenoid so i swapped it but still have the same issue. In reverse...buzzer is on, Push pedal to go- micro switch clicks and solenoid clicks on/off buzzer stops then soelonoid clicks on again and cart moves. All this with only pushing the pedal 1 time never letting of the pedal.
New solenoid did help alot!! Before i would have to push the pedal 4 or 5 times before it would move.
|
Paper clip method should have worked because you are bypassing the sensor.
Need to be sure I understand what you are saying. You put it in Reverse, buzzer sounded, you pressed the GO pedal and the cart did move backwards. Correct? The reverse buzzer stopped when you switched the F/R toggle to Forward or did the buzzer stop while you were going in reverse??
You mentioned in your last post that your battery light came on for a few seconds then went off. This indicates the OBC was in lockout and when you pressed the Go pedal it took it out of lockout but your reverse buzzer should not have worked and cart should not have moved. This is why I'm asking if the buzzer stopped working while you were backing up the cart. This is an important clue.