|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-25-2011, 06:11 PM | #1 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
What is the depth of the shaft hole in an Ezgo stock clutch?
Anybody got an Ezgo drive clutch laying around that they can measure the depth of the shaft hole for me? I've got a Team tapered shaft clutch that I want to use one of CPP's adapters to install it on a Vanny straight shaft but just wanted to compare the depth of the shaft hole with a tapered shaft Ezgo.Thanks for the help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2011, 07:27 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
Can we talk like this on the open forum?
|
03-25-2011, 07:53 PM | #3 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
|
03-25-2011, 07:54 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
Okay I'll go look..... About 2.5 inches with another .25 inch to the edge of the starter belt pulley .... hope that helps?
|
03-25-2011, 08:06 PM | #5 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
|
03-25-2011, 09:04 PM | #6 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
What the heck are you really trying to do here?? I don't get it...
Sorry, I'm kinds slow.... |
03-26-2011, 07:38 AM | #7 | |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: What is the depth of the shaft hole in an Ezgo stock clutch?
Quote:
I bought an Ezgo ST 4x4 with a bad Honda 18hp(tapered shaft) that I'm swapping out with a vanny 18hp (straight shaft) but the clutch just don't seem to go far enough onto the shaft to suit me so I wanted to know how far an Ezgo stock clutch slid onto the cranshaft for comparison if I decide to use one of Tom's (CPP) adapters,I just don't want to ruin my crankshaft by cutting it off then find out it won't work. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
stock yamaha clutch to 1" shaft | Big Block Talk! | |||
UpGrade Presendent depth.. | Electric Club Car | |||
16hp vanguard with stock ezgo clutch help | Big Block Talk! | |||
Machining Stock ezgo 4 stroke Drive Clutch | Big Block Talk! | |||
1in shaft clutch | Design Center |