my snubber keeps falling off

whitetail436 · 06-09-2008, 07:32 PM

just wondering what to do about my snubber (rubber thing on front engine mount) because after installing my lift kit it keeps falling off. any help would be appreciated.

Big Bump · 06-10-2008, 08:47 AM

If it's not broken you could put a dab, dab and a half, maybe two dabs
of 3M weatherstrip adhesive and it should stay on. What did you do to
move this so far back that it comes off? There's not much room between
the snubber and the frame.

whitetail436 · 06-10-2008, 10:03 AM

all i did was put a 6" rear lift on the cart and a stretch long travel lift on the front. it looks like the engine is at a steeper incline and the vibrations slowly work the rubber snubber off of the mount. it looks like it twists to get off.

Big Bump · 06-10-2008, 10:44 AM

The snubber has a flat slot to fit onto the flat metal. The rounded
slot is for the 'shock absorbing' feature. Is your's in the flat slot?
If so, it must be worn out for it to spin or twist. I'd still try the
3M.

whitetail436 · 06-10-2008, 11:18 AM

do you think that a few dabs of gorilla glue would also work?

Big Bump · 06-10-2008, 11:49 AM

Gorilla should work. I would use more than that dab I mentioned.
Gorilla swells and expands as it dries. No one but you will notice
all the excess when it swells out. Good luck.

06-09-2008, 07:32 PM	#1
whitetail436 Not Yet Wild Join Date: Feb 2008 Location: Caroline County Posts: 68	my snubber keeps falling off just wondering what to do about my snubber (rubber thing on front engine mount) because after installing my lift kit it keeps falling off. any help would be appreciated.

06-10-2008, 08:47 AM	#2
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90	Re: my snubber keeps falling off If it's not broken you could put a dab, dab and a half, maybe two dabs of 3M weatherstrip adhesive and it should stay on. What did you do to move this so far back that it comes off? There's not much room between the snubber and the frame.
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90

06-10-2008, 10:03 AM	#3
whitetail436 Not Yet Wild Join Date: Feb 2008 Location: Caroline County Posts: 68	Re: my snubber keeps falling off all i did was put a 6" rear lift on the cart and a stretch long travel lift on the front. it looks like the engine is at a steeper incline and the vibrations slowly work the rubber snubber off of the mount. it looks like it twists to get off.

06-10-2008, 10:44 AM	#4
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90	Re: my snubber keeps falling off The snubber has a flat slot to fit onto the flat metal. The rounded slot is for the 'shock absorbing' feature. Is your's in the flat slot? If so, it must be worn out for it to spin or twist. I'd still try the 3M.
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90

06-10-2008, 11:18 AM	#5
whitetail436 Not Yet Wild Join Date: Feb 2008 Location: Caroline County Posts: 68	Re: my snubber keeps falling off do you think that a few dabs of gorilla glue would also work?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-10-2008, 11:49 AM	#6
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90	Re: my snubber keeps falling off Gorilla should work. I would use more than that dab I mentioned. Gorilla swells and expands as it dries. No one but you will notice all the excess when it swells out. Good luck.
Big Bump Getting Wild Join Date: Mar 2008 Posts: 90