02-17-2015, 11:22 AM | #21 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: 1988 2pg engine mods
Morgan 44 What material did you use to build weld / solder that intake.I am looking to make an intake for my clone powered g14 with a 1 1/4 45 street el and vegascarts intake.I was going to use buna n hose as connecters but if copper and aluminum can be fused it woud be better.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-17-2015, 11:56 AM | #22 | |
Gone Wild
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
|
Re: 1988 2pg engine mods
Quote:
The later, quieter Yamaha DT250 used a 28mm and made a mellow 17hp@5500, so no need to get huge. 20 or so on the less-EPA'd versions. |
|
02-17-2015, 02:45 PM | #23 |
Not Yet Wild
Join Date: Feb 2015
Posts: 5
|
Re: 1988 2pg engine mods
Awesome thanks again. I don't have to worry about any EPA crap. I'm probably going to be running a non ethanol and avgas mix in mine. would you be able to tell me a part # or where to find the carb you speak of?
|
02-17-2015, 04:28 PM | #24 |
Gone Wild
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
|
Re: 1988 2pg engine mods
You don't need av-gas, unless you're flying an airplane ;)
These engines are still very understressed. Mikuni VM26 is what Morgan looks to have used. You'll need a used one from a similar application, or will have to do a complete jetting routine. |
02-18-2015, 09:48 AM | #25 |
Not Yet Wild
Join Date: Feb 2015
Posts: 5
|
Re: 1988 2pg engine mods
Thanks for the info. Do you guys any other tricks for the reed other then doing a complete custom job like morgan44?
|
02-18-2015, 12:26 PM | #26 |
Gone Wild
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
|
Re: 1988 2pg engine mods
|
02-18-2015, 03:45 PM | #27 |
Not Yet Wild
Join Date: Feb 2015
Posts: 5
|
Re: 1988 2pg engine mods
Yep there it isguess I should pay more attention to what I'm looking at. Where do you get the big one piece reed? Do you make it?
|
02-18-2015, 05:45 PM | #28 | |
Gone Wild
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
|
Re: 1988 2pg engine mods
Quote:
You can buy blank sheets of the petal material too. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Engine easy mods | Gas Yamaha | |||
1990 EZ GO Engine Mods | Gas EZGO | |||
Ez Go Engine Mods | Gas EZGO | |||
G16 Engine Mods ??? | Big Block Talk! |