|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-02-2021, 06:24 PM | #1 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
81 engine rebuild input.
Ok, I have a 1981 G1. I put a new top end in it last year, this year its toast. The bottom end probably went shortly after the rebuild. So the mechanic I took it too this time around says there is metal shavings on the piston, there is excessive play in the the piston and excessive play in the crank. I put a plowman muffler on it as well as the plowman top end, ran me over 1k canadian a year a go. So here I sit with no running cart and trying to decide if its worth a full rebuild after doing the top end a year ago. I would need an oversized piston, new rings, crank bearing, crank seals, possibly new crank shaft (I imagine I will have to put a caliper on it once it is out) , wrist pin, and have to get the new pot honed out... any input would be great. pretty disappointed....
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-02-2021, 07:16 PM | #2 | |
Getting Wild
Join Date: Jan 2008
Location: mich
Posts: 111
|
Re: 81 engine rebuild input.
Quote:
|
|
03-02-2021, 07:56 PM | #3 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
Re: 81 engine rebuild input.
Mr Plowman. Forward me your number and I will call, though I am sure you heard enough from me last spring lol. I am in Saskatchewan and purchased your top end kit last year. Evidentally the bottom end should have been done too. Not sure I want to tackle it though. I dont think I have the right tools to split the case and put it back together.
|
03-02-2021, 08:28 PM | #4 |
Getting Wild
Join Date: Jan 2008
Location: mich
Posts: 111
|
Re: 81 engine rebuild input.
8107361100. just pull it out and send it to me i will get it back to you within a week.
|
03-02-2021, 08:45 PM | #5 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: 81 engine rebuild input.
Quote:
Plowmans it top notch! And what a great personal offer. OP I hope you take him up on it. |
|
03-02-2021, 09:41 PM | #6 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
Re: 81 engine rebuild input.
I sent you a message via text. Thanks.
|
06-12-2021, 07:48 AM | #7 |
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
Re: 81 engine rebuild input.
Plowman, what do you get for a complete rebuild on a G1 engine? You can text me at 605-359-5236 as well.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 st 350 blown engine, rebuild or new Predator engine? | Gas EZGO | |||
Engine rebuild or ? | Clone Engine Swaps | |||
G16 engine rebuild ??? | Gas Yamaha | |||
84 Engine Rebuild | Gas EZGO | |||
engine rebuild | Gas Club Car |