|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-19-2008, 09:13 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2008
Posts: 4
|
Air Breather On 1997G16A YAMAHA
I just put an element Filter Like what they use on a Raptor Block %hp Briggs Flathead. Is that ok or am I allowing too much air intake. If its ok can I also put a breather filter on the vlave cover stem that went to the O.E braether box? I could use some helpful hints from somone that knows more about these carts.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-20-2008, 08:12 AM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Air Breather On 1997G16A YAMAHA
Yes you can. You may have to re-jet the carb to allow more gas flow.
Check here>http://www.cartpartsplus.com/carb-je...22-lifted.html |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-20-2008, 10:29 AM
|
#3 |
|
Not Yet Wild
Join Date: May 2008
Posts: 4
|
Re: Air Breather On 1997G16A YAMAHA
Thanks so much for the help, this forum is great everybody is very helpful. I really appreciate it...
|
|
|
|
|
|
||||||
|
|
Linear Mode
