|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-07-2014, 06:31 PM | #1 |
Not Yet Wild
Join Date: Mar 2014
Posts: 34
|
DCS forward/reverse lever not staying put.
My F/R lever doesn't stay in the forward position. It slowly moves just enough to stop the cart. It seams hard to move. I have sprayed some silicone spray in there but it still acts up.
I haven't taken it apart yet, but wanted some advice before I do. As always thanks for the help. EDarien. Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-07-2014, 06:59 PM | #2 |
Gone Wild
Join Date: Oct 2011
Location: Ellensburg, WA
Posts: 179
|
Re: DCS forward/reverse lever not staying put.
Pretty simple to take apart, was having problems with my cart last year and took it apart. I can't remember if there is a spring in there that would hold it but you can take it apart with just one bolt.
|
04-07-2014, 07:23 PM | #3 |
Not Yet Wild
Join Date: Mar 2014
Posts: 34
|
Thanks. Just wanted to make sure I don't tear anything up.
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
how do i take off the forward reverse lever ? | Electric Yamaha | |||
forward and reverse lever question | Gas Yamaha | |||
Change forward reverse lever with switch | Electric EZGO | |||
Getting the forward/reverse lever off | Gas Club Car | |||
How do you take off the forward-reverse lever | Gas Yamaha |