|
05-22-2017, 08:48 PM
|
#1 |
|
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
Wheel studs too short
I'm pretty leary of the length of threads I have left on my wheel studs once I put on my custom wheels. Seems like i dont have 1/2" or less of threads for the wheel nut. Should I be concerned? I cant seem to find any longer ones to replace the original wheel studs.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-22-2017, 10:17 PM
|
#2 |
|
Gone Wild
Join Date: Apr 2015
Location: New York
Posts: 362
|
Re: Wheel studs too short
I have a G9 and I have the same issue, I do not like them and would love to find some longer ones!
Sent from my iPhone using Tapatalk |
|
|
|
|
05-22-2017, 11:47 PM
|
#3 |
|
Getting Wild
Join Date: May 2016
Posts: 122
|
Re: Wheel studs too short
What if you ran a small spacer? That would be about the same as adding longer studs (assuming the studs on the spacer were longer than stock) and would be a simple install as long as you had the room to add some width to the track.
|
|
|
|
|
05-24-2017, 09:49 AM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 71
|
Re: Wheel studs too short
Are they studs or bolts? My S4 has bolts that come off with the wheel instead of studs that stay on the hub.
|
|
|
|
|
05-24-2017, 09:50 AM
|
#5 |
|
Gone Wild
Join Date: Apr 2015
Location: New York
Posts: 362
|
Re: Wheel studs too short
Studs
Sent from my iPhone using Tapatalk |
|
|
|
|
05-24-2017, 10:15 PM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 71
|
Re: Wheel studs too short
I'd figure out the measurements and Google those measurements for the studs vs just looking for EZ GO whatever model studs. I'm sure there is something out there that would work.
|
|
|
|
|
05-24-2017, 10:17 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 71
|
Re: Wheel studs too short
http://www.moserengineering.com/other-parts/studs.html
If you find one that would fit and is too long, put the nut on, count the number of threads you need, cut the stud, then back the nut off to finish the thread. |
|
|
|
|
05-24-2017, 10:25 PM
|
#8 |
|
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
Re: Wheel studs too short
The standard EZGO stud is only 1 3/16" long. Need closer to 1 1/2-1 5/8"
|
|
|
|
|
05-25-2017, 08:47 AM
|
#9 | |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 71
|
Re: Wheel studs too short
Quote:
|
|
|
|
|
|
05-25-2017, 12:49 PM
|
#10 |
|
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
Re: Wheel studs too short
They're 1/2"-20 thread
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wheel Studs | Electric Club Car | |||
| Wheel Studs | Gas Club Car | |||
| Is it common for the studs to be too short after changing wheels. | Electric EZGO | |||
| Wheel Studs | Electric Club Car | |||
| Rear Wheel Studs too Short for 3 inch wheel Spacer | Electric EZGO | |||
Linear Mode
