|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-11-2012, 04:16 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Location: Mooresville, IN
Posts: 24
|
School me on the GX670 into a 2000 CC.
I've been searching various sources and haven't come up with anything definitive other than it's been done. What am I looking at as far as installing this in my 2000 club car. What kind of installation issues am I up against? How does it bolt in, does it require lift kit, exhaust and starter clearance issues am I up against.
The reason I'm considering this instead of a briggs is that I've got a lead on this honda 24hp gx670 for less than $1k running with less than 100 hours on the clock.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-18-2012, 09:44 PM | #2 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: School me on the GX670 into a 2000 CC.
I don't think the honda is much different size than the vanny. There are plenty of posts here on it, check them out. One issue is if you have CCW rotation on your engine.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
GX670 sluggish at low rpm | Big Block Talk! | |||
Honda gx670 24hp | Big Block Talk! | |||
Honda GX670 header | Big Block Talk! | |||
Yamaha G-16 w/ honda GX670 | Big Block Talk! |