03-12-2013, 10:13 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 8
|
341cc head milling?
Great site. New member here and have a ? about my 1991 DS 341cc motor. I have a new piston .50 over because it had been bored already to .25 . I was wondering piston to head clearance and valve to head clearance so i can mill head. Anyone know how much i can mill it? the pressure lube motors can go .30 im told?!? although i do not have that motor but thats all i can find on web about milling heads. thanks for any input!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-12-2013, 11:16 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 341cc head milling?
I took .050 off of mine, My machinist told me I could take .10 but I was happy with the increased compression. I did a .050 piston at the same time. Performance was great and the stock starter worked fine. Good Luck
|
03-13-2013, 12:07 PM | #3 |
Not Yet Wild
Join Date: Mar 2013
Posts: 8
|
Re: 341cc head milling?
thanks scotty i appericate it!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Milling Heads Briggs V twin | Big Block Talk! | |||
club car 341cc | Gas Club Car | |||
87` 341cc engine | Gas Club Car | |||
Milling Machine | Design Center | |||
Milling Cylinder Head | Gas Yamaha |