10-06-2021, 06:20 AM | #1 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
New coil
My ezgo txt is a 2004 model, unfortunately the coil seems to have seen its last working trip.
What I would like to know is will a pre 2004 model coil work on my model? The price difference plus postage and import duties is enormous |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-06-2021, 06:29 AM | #2 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 773
|
Re: New coil
Pretty sure your 2004 model will have an MCI engine. You can easily tell by the exhaust manifold if the manifold is cast into the head, it is MCI....pre MCI had a bolt on cast iron head. The MCI coil produces a hotter spark, I don't believe the older style coil will work properly in the MCI engine. What makes you think the coil has died? Look in the tech section of the forum for the manual...you can test resistance across both primary and secondary sides of the coil to verify if it is good or not. Failure to spark often is caused by other issues.
|
10-06-2021, 06:45 AM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: New coil
Welcome to this side of the nut house, before you replace anything remove any and all of the black ground wires over by the starter solenoid and clean them very good.
For some reason the grounds like to corrode there and cause a loss of spark |
10-06-2021, 06:49 AM | #4 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: New coil
No , it will not work. The coil was part of the newer updates on these MCI engine.
|
10-06-2021, 07:40 AM | #5 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
Re: New coil
definitely mic
|
10-06-2021, 07:41 AM | #6 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
Re: New coil
sorry mic
|
10-06-2021, 07:47 AM | #7 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
Re: New coil
mci
|
10-06-2021, 08:02 AM | #8 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
Re: New coil
getting zero reading across + and- , how do I get onto the tech section
|
10-06-2021, 09:19 AM | #9 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: New coil
Testing the Ignition Coil
Set the meter to the ohms scale, measure the resistance between both primary wire terminals and between the secondary wires (Ref Fig. 3 on page M-5). A normal reading would be: Primary (+ and -): 1.87 - 2.53 W and Secondary (A and B): 10.8 - 14.6KΩ. If readings obtained are out of the above ranges, replace ignition coil |
10-06-2021, 10:11 AM | #10 |
Not Yet Wild
Join Date: Nov 2020
Location: Stoke Golding England
Posts: 28
|
Re: New coil
spot on. can anyone supply advice on testing with a multi tester
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1992 Coil/ignitor to all-in-one coil | Gas Club Car | |||
WTB Pre MCI Coil or trade MCI Coil for Pre MCI (I'm in Al) | Golf Carts and Parts | |||
Yamaha jf2 ignitor, coil, pulsar coil for sale | Golf Carts and Parts | |||
exitor coil and coil and head for 1990 C.C. | Golf Carts and Parts | |||
10.4v to coil wires until i hook up coil, then zero | Gas EZGO |