|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-24-2020, 10:37 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2020
Location: St. Louis, Missouri
Posts: 6
|
1989 Ezgo Driven Clutch Bolt removal
First time cart owner and trying to fix up the ole girl. Trying to replace the Driven clutch but have been unsuccessful removing the driven clutch bolt. Does anybody know if it’s the ole lefty loosey/righty tighty or is it reversed to remove the bolt?
Any other tricks/tips I should know about replacing the driven clutch? Thanks in advance! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-24-2020, 10:45 PM
|
#2 |
|
Getting Wild
Join Date: Mar 2019
Posts: 141
|
Re: 1989 Ezgo Driven Clutch Bolt removal
Lefty loosey with an impact wrench. Note the order of your washers etc. If you are replacing it with a new one, its pretty straightforward.
|
|
|
|
|
05-31-2020, 01:25 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2020
Location: Jefferson City, MO
Posts: 5
|
Re: 1989 Ezgo Driven Clutch Bolt removal
Just remove mine and I was able to get the bolt out without issue, but had to use a mallet to get the clutch removed for the shaft. I held the clutch together with one hand, in order to reduce the banging and rotated the clutch after each strike. It took probably 5 minutes of this, but once I moved it an inch or so, it slid right off.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1989 ezgo driven clutch replacement | Gas EZGO | |||
| 85 ezgo clutch removal bolt 3/4" ? | Gas EZGO | |||
| 1990 ezgo marathon driven clutch bolt broke | Gas EZGO | |||
| driven clutch 1989 ezgo | Golf Carts and Parts | |||
| ISO driven clutch for a 1989 ezgo | Golf Carts and Parts | |||
Linear Mode
