|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-30-2015, 01:56 PM | #11 |
Gone Wild
Join Date: Jul 2015
Posts: 308
|
Re: I replaced the shaft on my F/R switch, now I'm having trouble getting it lined up
I got it figured out it was nothing really. It just needed a little more tension on it. I don't have the replacement as screw yet to hold it tight.
On a side note, the stupid thing wouldn't do anything at all. It's been sitting at the cart place for a couple months. I screwed around with the f/r for about an hour before I realized to check the fuse. Yep the fuse was blown. I tried to call the old man I know who knows everything about gas carts. He finally called back after I figured it out. He asked me had I just put lights on it, and sure enough, they had also installed lights. He said to go up to a 20 instead of a 10 after installing lights. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-30-2015, 02:00 PM | #12 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: I replaced the shaft on my F/R switch, now I'm having trouble getting it lined up
15 amp maybe... 20 may be too much!
My cart still uses a 10 amp! (with headlights, running lights, brake lights, underglows etc.) |
09-30-2015, 03:41 PM | #13 |
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: I replaced the shaft on my F/R switch, now I'm having trouble getting it lined up
Agree, mine has headlights, rear lights and brake lights from the factory with the 10 amp fuse.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
replaced forward reverse switch now charger will not shut off | Electric Club Car | |||
Replaced input shaft bearings 06 TXT | Electric EZGO | |||
replaced F/R switch, solenoid ticking. | Gas EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
can the two copper bolts on the forward reverse switch be replaced | Electric EZGO |