|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-21-2018, 05:54 PM
|
#1 |
|
Gone Wild
 Join Date: Sep 2018
Posts: 791
|
1995 Medalist cowl rivets
I finally got the front cowl for my medalist and it's my understanding that it gets riveted on. I just want to make sure I get the right rivets. As far as I can tell, the part number is: 15058-G6. Just looking for someone to confirm that for me before I buy them.
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-21-2018, 06:43 PM
|
#2 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 1995 Medalist cowl rivets
It looks like it but it doesn't show the slots that make this an expanding rivet. Everybody using the same wrong picture not slotted - probably because they are all selling the same product.
 So ??? |
|
|
|
|
11-21-2018, 08:37 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2013
Location: Martinsburg WV
Posts: 281
|
Re: 1995 Medalist cowl rivets
NOT SURE but, i feel those are correct for bottom and 14601-G01 is for the rest maybe. Don't take this as correct lol
|
|
|
|
|
11-21-2018, 11:41 PM
|
#4 |
|
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: 1995 Medalist cowl rivets
The one I used had a smaller flange on the and slits in the side, they're called tri-grip. I ordered 2 sets of the TXT rivet sets and glad I did, It was a little confusing figuring out where all the other rivets went in the rear section. When I took mine apart I removed all the plastic pieces that were held on by rivets too. I don't know for certain but I'm pretty sure the Medalist uses different size rivets to hold everything together under the seat and there's certainly more rivets needed than the plastic body of the TXT
|
|
|
|
|
11-21-2018, 11:43 PM
|
#5 | |
|
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: 1995 Medalist cowl rivets
Quote:
|
|
|
|
|
|
11-22-2018, 12:39 AM
|
#6 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 1995 Medalist cowl rivets
Quote:
|
|
|
|
|
|
11-22-2018, 07:07 AM
|
#7 |
|
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist cowl rivets
https://www.golfcartking.com/ezgo-tx...-3-16-x-15-16/
These are the rivets I was looking at (I know it's out of stock). It comes in a 10 pack and there are 10 holes in the cowl. I'm assuming these are the right ones, but maybe someone that has actually done this before can chime in. Happy Thanksgiving to everyone and their families. |
|
|
|
|
11-22-2018, 07:18 AM
|
#8 |
|
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist cowl rivets
duplicate post
|
|
|
|
|
11-24-2018, 04:04 PM
|
#9 |
|
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist cowl rivets
Well, I fixed, painted and installed the cowl piece today. Instead of using rivets, I used stainless steel 8-32 button head screws and nylon locking nuts. I didn't want to get the wrong rivets and I can remove it if necessary without drilling out rivets.
|
|
|
|
|
11-25-2018, 09:36 AM
|
#10 |
|
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: 1995 Medalist cowl rivets
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB 1995 Medalist front cowl piece | Golf Carts and Parts | |||
| 1995 Ezgo TXT rivets | Electric EZGO | |||
| 1995 yamaha g9 front cowl plate | Gas Yamaha | |||
| Can I install the front Cowl WITHOUT rivets | Electric EZGO | |||
| Front cowl for my 95 Medalist | Electric EZGO | |||
Linear Mode
