|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-06-2010, 12:39 AM | #11 |
Getting Wild
Join Date: Oct 2010
Posts: 131
|
Re: forward to reverse shift is hard
check to make sure the 9/16" headed nut on the pivot shaft is not too tight. I just bought a stock 1982 that had a new switch installed prior to purchasing and the nut was so tight the brass contacts were hitting the edge of the other contact, thus creating a difficult shift. I loosened the pivot nut 1/4 turn and it shifts like a dream!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-19-2010, 10:27 AM | #12 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: forward to reverse shift is hard
Thanks I'll try it
|
10-19-2010, 11:14 AM | #13 |
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: forward to reverse shift is hard
Use a longer lever. LOL
|
11-17-2010, 12:45 PM | #14 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: forward to reverse shift is hard
I loosened nut and lubed the switch, works great now, thanks everyone
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
Hard to shift F/R switch lever on '98 TXT | Electric EZGO | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car | |||
hard to shift | Gas Club Car | |||
hard shift? | Gas Club Car |