|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-25-2012, 12:44 PM
|
#1 |
|
Gone Wild
 Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Drive Idle
Anyone know of a way to bypass kill circut 2009 Gas Drive???I have no tech info on the drive,the pedal box is single switch which seem to complete both start and kill functions.Thanx in advance Dave
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-26-2012, 05:53 PM
|
#2 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Drive Idle
Why do you want it to idle Dave? The real problem is the primary clutch isn't set up for idling, it doesn't have a retun spring in it. You can get one though.
|
|
|
|
|
10-29-2012, 08:23 AM
|
#3 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Drive Idle
Smallblock,for some reason beyond me,the customer wants it to run at idle,I don't speak Yamaha so I was just asking if it could be done?If it takes modifying the clutch than the answer is, can't be done !!Thanx for the responce,Dave
|
|
|
|
|
10-29-2012, 09:02 AM
|
#4 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Drive Idle
Didn't mean to say it can't be done, It could. Just need a primary clutch return spring, witch is available from Erlander's. Might need to move the engine back alittle for belt tension also (it would need to "slip" alittle). The micro swicth (at the accelerator pedal) could be hard wired/bypassed, then the key switch would activate the solenoid/starter circuit.
|
|
|
|
|
10-29-2012, 09:20 AM
|
#5 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Drive Idle
Gotcha,been around long enough to know anything can be done,given enough effort,knowledge and oh yea money,This guy isn't going to go for any of the above..thanx again you are the Yami Guy.Dave
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| idle in g-2?? help | Gas Yamaha | |||
| will idle but not take off | Gas EZGO | |||
| How do I idle | Gas Yamaha | |||
| g1 won't idle | Gas Yamaha | |||
| getting my g16 to idle | Gas Yamaha | |||
Linear Mode
