07-12-2015, 04:58 AM | #1 |
Gone Wild
Join Date: Mar 2015
Location: central florida
Posts: 368
|
95 ezgo
My cart has a black cover over the controller, I took it off to wire brush the back plate and clean it up. I did make up a set of new cables for the cart. Does the black plastic cover need to go back on? I still have maybe 2 good bolt holes for it.
Looks like there was a cover over the F&R switch. but I didnt get that one with the cart. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-12-2015, 07:56 AM | #2 |
Gone Wild
Join Date: Aug 2010
Location: Marion, Ohio
Posts: 1,391
|
Re: 95 ezgo
It's best to have the cover on a stock controller. It doesn't take a lot of moisture to wipe one out. I only have the two top holes left too. The bottom bolts broke off in the holes. Something is better than nothing, though.
|
07-12-2015, 02:34 PM | #3 |
Gone Wild
Join Date: Mar 2015
Location: central florida
Posts: 368
|
Re: 95 ezgo
Thank you for the reply, I will put it on tomorrow.
|