A2 stud snapped off

[NoleFan4Ever]

Thanks

[Cruise Master]

Originally Posted by crash test dummy

...yea you're way off here

Thanks, and I bow down to your knowledge. As Clint Eastwood said, "every man needs to know his limitations."

Originally Posted by Hawk1

Ok I tried to remove that way and the motor moved a little and would not come off. Did not want to force it and break anything

tap motor with a rubber mallet it should pull off .... then you have the fun job of getting it out
put the bolts back in
jack up cart and place it on jack stands
place the jack under the axle
remove the rear shackles and lower the jack
remove the bolts and pull the motor off or tap with mallet ( while holding the motor )

it is heaver than you think
when reinstalling it becareful of the 1/2" bolt it can snap the flange

[theboss20]

And of course be sure the main negative cable is removed before messing with things.

[Hawk1]

Got the motor off. Yea it was stuck on the shaft a bit.
A little work and it did come off.
Will be calling Dave to get that motor he has

[Hawk1]

Don't like the looks of these windings

[NoleFan4Ever]

Originally Posted by Hawk1

Got the motor off. Yea it was stuck on the shaft a bit.
A little work and it did come off.
Will be calling Dave to get that motor he has

Remind him of the BGW Fathers Day Discount!!

[NoleFan4Ever]

Originally Posted by Hawk1

Don't like the looks of these windings

But not unusual for moderate usage and age.......