|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-28-2017, 10:38 AM
|
#1 |
|
Not Yet Wild
 Join Date: Jan 2016
Location: Orlando, fl
Posts: 40
|
Push Pull to Rocker for headlights?
I really want to change out my push pull switch for my headlights. I have a 2000 EZGO series cart. The switch has 2 prongs and id like to change that to a 3 pronged latching push button switch. the switch has a ground prong the power prong and one prong to the light? Will this work or does the fact the ground is also in the switch possibly cause a problem somewhere else?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-28-2017, 11:01 AM
|
#2 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Push Pull to Rocker for headlights?
Typically a switch has + and - for the purpose of an internal light only.
|
|
|
|
|
10-28-2017, 02:13 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2016
Location: Orlando, fl
Posts: 40
|
Re: Push Pull to Rocker for headlights?
So the headlight push pull switch has two sides i am assuming its straight power that interrupts when the switch is depressed (off) and connects when Pulled (on)? the switch id like to try and make work has 3 prongs one (-) one (+) and one to the accessory. Would the (-) wire only be connected for the internal light that indicates the switch is on?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| push pull light switch wiring | Electric Club Car | |||
| Replacing Push/Pull with Rocker Switch | Electric EZGO | |||
| Pull instead of Push Throttle | Gas EZGO | |||
| 12v Radio with push/pull switch fried the wire! | Electric Club Car | |||
Linear Mode
