|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-09-2018, 05:48 PM | #1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 2
|
Voltage Reducer Wiring for RXV
I have a 30 amp voltage reducer that I want to install on my RXV. The voltage reducer has a + and - 48v input and a + and - 12v output. I want the voltage reducer to only be on when the key is switched. My question is can I wire the 48v + input to the solenoid side that is switched? Or would my best course of action be to wire directly to the batter pack with a toggle switch in line?
Please advise. Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2018, 06:56 PM | #2 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Voltage Reducer Wiring for RXV
Wire it directly to the pack. Use a switch to turn it on/off.
|
02-10-2018, 02:39 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Voltage Reducer Wiring for RXV
Hook 48v B- to pack negative. Hook 48v B+ to solenoid large terminal on solenoid that goes from solenoid to controller B+. The solenoid on a Rxv is generally always on when the key is in any position other than Off.
|
02-10-2018, 11:09 PM | #4 |
Not Yet Wild
Join Date: Jul 2015
Posts: 2
|
Re: Voltage Reducer Wiring for RXV
Thanks to you both!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Question about wiring voltage reducer and voltage meter to key switch | Electric EZGO | |||
36v TXT voltage reducer wiring help | Electric EZGO | |||
Wiring Voltage Reducer | Electric Club Car | |||
Voltage Reducer Wiring Help | Electric Club Car | |||
Voltage reducer wiring | Electric Club Car |