|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-19-2018, 02:54 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2018
Location: North Augusta, SC
Posts: 1
|
winch wiring issues
I am attempting to install a 2500lb winch on a 36v E-Z-GO cart. Installed a 30amp converter that has two 15amp legs. Wired lights to one leg and winch to the other. Lights work, winch clicks. I do not believe I am getting enough amps to the winch. Any help in resolving this issue is greatly appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-19-2018, 05:00 PM
|
#2 |
|
Gone Wild
 Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
|
Re: winch wiring issues
You are exactly right !!!
My HF 2500lb winch requires a 50 amp supply... your little 30 /15 amp reducer is not going to work.. it has already, or will soon fail.... also the "low power setup" you have will also damage your winch.... You need to re-think your power needs, a 50 amp device requires at least 6 gauge wire on both leads (don't even think about grounding to the frame !!) Lots of folks have an extra battery (12v) just for the winch or other hi power accessories... |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 wiring issues | Gas Yamaha | |||
| Wiring issues | Gas Club Car | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
| Winch wiring | Electric EZGO | |||
Linear Mode
