05-11-2020, 05:35 PM | #1 |
Not Yet Wild
Join Date: May 2020
Posts: 2
|
95 Club car DS
Hi all, I have been going thru the site and was wondering if I can get some help. I payed a guy to upgrade with alltrax controller sr48500, motor and mcor4 upgrade. The guy has had it for 3months and cut out all the wiring. I have looked but cannot find a wiring diagram the shows the upgrades an how to wire. Any help would be much appreciated. Thanks Carl
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-11-2020, 05:39 PM | #2 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: 95 Club car DS
Do you have the cart now? Post some photos so we can see what you have going on.
I'm not familiar with that controller but I'm sure others are. |
05-12-2020, 02:01 PM | #3 | |
Not Yet Wild
Join Date: May 2020
Posts: 2
|
Re: 95 Club car DS
Quote:
|
|
05-12-2020, 02:23 PM | #4 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: 95 Club car DS
The last photo in the wiring diagrams in the Electric Club Car Section "Sticky" of wiring diagrams is the diagram for the cart as it came from the factory.
What motor are you using? Can we see a photo of it? |
05-12-2020, 04:23 PM | #5 |
Gone Wild
Join Date: Nov 2018
Location: Florida
Posts: 370
|
Re: 95 Club car DS
Use the diagram Mooncarter said to. I think the only difference for those switches is where the one in the diagram goes to pin #2 on the controller you will hook it to the reverse (blue) pin on the Alltrax, everything else should be straight forward.
|