Scotty's Cables Question

[turkish_ff]

Originally Posted by scottyb

All these posts and lol we still do not know which drive system you want a cable # layout for. One of these should work.

Sorry, this info should have come with the set.

Exactly what I was looking for, thank you. Appreciate it.

I thought I had provided enough info initially, I’ll be more specific in the future. TXT 48

[turkish_ff]

One more question. The original motor had r/b/w wires coming out of it with a 3 pin connector on the end that was connected to the controller. The new B4 has a triangular pigtail with r/b/g wires but they are thicker. Is it ok to splice the thicker wires from the B4 to the thinner wires from the original motor in order to hook in to the Alltrax?

[JohnnieB]

Splice the speed sensor output from the motor to the speed sensor input to the controller. The speed sensor is a very low amp circuit, so slightly thinner wires won't make any difference.

Red to Red
Black to Black
Green to White.

[turkish_ff]

Originally Posted by JohnnieB

Splice the speed sensor output from the motor to the speed sensor input to the controller. The speed sensor is a very low amp circuit, so slightly thinner wires won't make any difference.

Red to Red
Black to Black
Green to White.

Great, thank you