|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-01-2021, 03:14 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2013
Location: Jacksonville, Fl
Posts: 170
|
Rxv will not move
2016 Curtis controller
If I turn the key it goes through the checks but will not release the brake. I plugged my handheld into it and it’s leaving the brake command at 100% throttle mapping moves up and down like it should but the throttle command stays at 0. I’m really not an rxv guy so any help is appreciated |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-01-2021, 03:17 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: Rxv will not move
Try pulling up on the throttle and brake pedals. They sometimes get trash behind them and don’t return to zero..
|
|
|
|
|
02-01-2021, 06:39 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2013
Location: Jacksonville, Fl
Posts: 170
|
Re: Rxv will not move
Thanks, on the handheld I’m reading 0% both the throttle and brake inputs but I do know that pretty common on these
|
|
|
|
|
02-02-2021, 10:30 AM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Rxv will not move
Ok, what faults & error history?
|
|
|
|
|
02-02-2021, 11:51 AM
|
#5 |
|
Gone Wild
Join Date: Sep 2013
Location: Jacksonville, Fl
Posts: 170
|
Re: Rxv will not move
I cleared all the faults yesterday. There are no present errors. This morning fault history says controller over current and comms supervision
|
|
|
|
|
02-02-2021, 02:36 PM
|
#6 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Rxv will not move
Check active faults while pressing pedal.
|
|
|
|
|
02-02-2021, 05:20 PM
|
#7 |
|
Gone Wild
Join Date: Jun 2016
Posts: 180
|
Re: Rxv will not move
This may be out to lunch...but I had a problem with the electric plug going into the brake coil connection ..not making contact...I removed the plug...pushed the contacts in the plug in a bit ..and replugged..all Ok
|
|
|
|
|
02-02-2021, 09:27 PM
|
#8 | |
|
Gone Wild
Join Date: Sep 2013
Location: Jacksonville, Fl
Posts: 170
|
Re: Rxv will not move
Quote:
It seems to me like the cart is locking itself out |
|
|
|
|
|
02-03-2021, 06:56 PM
|
#9 |
|
Not Yet Wild
Join Date: Dec 2017
Location: Florida
Posts: 16
|
Re: Rxv will not move
I had similar problem. When you put key in N and put cart in tow does it release brake? If it doesn’t try jiggling controller plug. I fixed mine by spray cleaning controller plug reseating use CrC contact cleaner.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48v ds will not move | Electric Club Car | |||
| G16 Won't move AT ALL when wet... | Gas Yamaha | |||
| 1996 Series DS 48V won't move on ground, wheels barely move on jacks | Electric Club Car | |||
| EZ Go TXT won't move | Electric EZGO | |||
| 36V E-Z-Go will not move | Electric Club Car | |||
Linear Mode
