lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-21-2015, 05:41 PM   #1
Blown86
Not Yet Wild
 
Join Date: Jun 2015
Posts: 29
Default Pulsar coil

Wondering what pulsar coil everyone using on the hei conversion
Blown86 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-21-2015, 07:47 PM   #2
cart around
Test before replacing
E-Z-GO
 
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,206
Default Re: Pulsar coil

The original pulsar is used. The ignitor is what gets replaced.
cart around is offline   Reply With Quote
Old 09-21-2015, 08:12 PM   #3
Blown86
Not Yet Wild
 
Join Date: Jun 2015
Posts: 29
Default Re: Pulsar coil

OK this what I've got I bought someone's cobbled up mess trying to get it fixed right for the wife and kid to drive i did the he I conversion and someone already replaced pulsar I ohm it read 154 and just put new igniter and he coil as conversions states but can't get it to spark also see pics where the ignitor has a wire coming off of the mounting hole where does it go
Blown86 is offline   Reply With Quote
Old 09-21-2015, 08:16 PM   #4
Blown86
Not Yet Wild
 
Join Date: Jun 2015
Posts: 29
Default Re: Pulsar coil

Blown86 is offline   Reply With Quote
Old 09-21-2015, 09:11 PM   #5
jeffrun
Gone Wild
 
Join Date: Apr 2011
Location: Washington State
Posts: 385
Default Re: Pulsar coil

that wire goes to a good ground, it grounds the hei metal plate,which should be mounted on metal, preferbly aluminum for a heatsink.
jeffrun is offline   Reply With Quote
Old 09-21-2015, 09:18 PM   #6
Blown86
Not Yet Wild
 
Join Date: Jun 2015
Posts: 29
Default Re: Pulsar coil

OK I've just got mine mounted to the frame is that OK ?
Blown86 is offline   Reply With Quote
Old 09-21-2015, 10:07 PM   #7
jeffrun
Gone Wild
 
Join Date: Apr 2011
Location: Washington State
Posts: 385
Default Re: Pulsar coil

well you can leave it , but when you get it running, check the hei and see if its getting hot, if hot to touch ,remount to a aluminum bar for better cooling.
jeffrun is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
G9 Pulsar Coil HELP ME PLEASE!!! Gas Yamaha
G9 pulsar coil Gas Yamaha
Pulsar coil Gas EZGO
Pulsar coil Gas EZGO
pulsar coil Gas Yamaha


All times are GMT -5. The time now is 07:03 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.