|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-09-2022, 07:45 AM | #1 |
Not Yet Wild
Join Date: May 2022
Posts: 2
|
2017 EZGO Express S4 - No Clicking and No Status Light
I have a 2017 EZGO Express S4, 48 volt electric and not gas. I was preparing to install a radio and was looking for a switched hot wire. I removed the ignition switch and I accidentally touched the key switch white/yellow wire to ground with the power on. I heard a click and now I have no power and no click. I checked every single fuse I could find and all are fine.
Here are some additional things: The headlights, taillights and horn work fine. The battery voltage indicator no longer works. There is NO click at the solenoid when the pedal is pressed. There is a an LED status light on the Curtis motor controller, but there are no lights on at all; not blinking or steady, nothing. Battery voltage is fine. The cart worked perfectly before I started this process. My immediate thought was a fuse because of the sound that I heard, but all that I can find are good. Thoughts? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2022, 01:39 PM | #2 |
Not Yet Wild
Join Date: Apr 2022
Posts: 17
|
Re: 2017 EZGO Express S4 - No Clicking and No Status Light
Did you get this fixed? I just did the same exact thing!
|
05-21-2022, 09:26 AM | #3 |
Not Yet Wild
Join Date: May 2022
Posts: 2
|
Re: 2017 EZGO Express S4 - No Clicking and No Status Light
I did not get this fixed. Well I guess I did, but it required a controller and solenoid replacement. I replacement mine with an Alltrax 48400.
However, I now have a new problem. When I switch to forward, the cart moves slightly in REVERSE then stops. When I move the switch to reverse, the cart does not move at all. I have checked the connections three times and all are correct. |
05-21-2022, 12:37 PM | #4 |
Not Yet Wild
Join Date: Jul 2021
Posts: 37
|
Re: 2017 EZGO Express S4 - No Clicking and No Status Light
If it's not clicking, I would check for voltage on the far side of the solenoid. put a meter on it and turn the key to ON. If nothing on the that side, move back to the other side of the solenoid. I don't know how to test the speed controller, so do with that what you will.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2017 S4 Express Turn Signals and Brake Light | Gas EZGO | |||
Curtis PMC SepEx 1264-5407 Status Light | Electric EZGO | |||
Just bought 2017 EZGO Express S4 used and have problems | Electric EZGO | |||
Alltrax controller - no status light | Electric Club Car | |||
No charger interlock on factory 2017 EZGO L6 Express 48v | Electric EZGO |