Front Clutch Assembly

[Hot Rod Black Golf Cart]

How do I post in there thread? I'm new at this.

[Mike Mac]

Just go down to the bottom of the last page and click the reply box. Type what you want to say, just like your doing in this thread!

[thecurti]

Hot Rod
I have a complete Primary
Just PM me
Dont believe anything Mike Mac says. Never trust a guy that looks like he has a turd in his mouth

[BamaG14]

Hot Rod my clutch weight broke too on my G14 which looks basically like yours . Only thing mine broke on I will call the rod side not on the weight like yours. It cracked my cover . I ordered a kit from Golf Cart King which had all three weights with the plastic washers. My washers were about all gone . One of my plastic slides was wore out too so had to order those from another source. Only thing I didn't order was the pins. Mine turned out not too bad. Had to use a little heat on some of the set screws cause they had loctite. I basically have a new primary now . Works great.
If I was you I would order a weight kit with all three and they come with the plastic washers. Mac suggested that to me and glad I did it .

[Mike Mac]

Read this Curti? See Bama trusts me!! I'm just not as bad a guy as I'm trying ta be!!


Curti's got a good clutch if you need it Hot Rod!! I just like fine cigars!!



And Hot Rod, Curti is not as bad as "his" picture looks!!...

[LURCH]

You could just send your clutch to Plowman's he will completely rebuild it and send it back out the day he gets it. Don does a lot of things to it that you want be able to do and its not that expensive. Give him a call just to check.

[Hot Rod Black Golf Cart]

So how do I remove the old parts ans install the new drive clutch repair kit? Thanks for the offer on the primary Curti. I'm retired and disabled and I'm limited on resources. But I do appreciate all of the help that I have recieved from everyone on this forum.
HOT ROD BLACK GOLF CART

[Mike Mac]

Hot Rod, I don't know what deal Curti made you, but I believe replacement weights are about $30. a piece.

[Hot Rod Black Golf Cart]

Mike Mac, I already have a drive clutch repair kit I bought from a local golf cart shop. I paid $127.00 for the whole kit. I just need help with the removal of the old assembly and installing the new.

[Mike Mac]

HotRod, put an allen wrench in each set screw, and apply heat to the screw area with a propane torch till the set screw loosens. They are glued in with lock tight. Then go about changing each weight in the same manner. Use blue lock tight on each screw as you reassemble!

There are a few threads on this first page, talking about clutch problems. Check them out!

When you comin to G8??