|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-23-2009, 02:24 PM | #1 |
Not Yet Wild
Join Date: Feb 2009
Location: Dallas, Texas
Posts: 59
|
No Reverse after wire upgrade
I just upgrade all the cables on my 93 E-Z-GO to 4 guage, but for some reason the reverse does not work now. Forward works fine. I remove and replaced one cable at a time, so I know it is wired properly. Im guessing since I made the cables my self is that I did not crimp one of them very well.
Does anyone know which cables I should look at for reverse? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-23-2009, 03:35 PM | #2 |
Not Yet Wild
Join Date: Jul 2009
Posts: 6
|
Re: No Reverse after wire upgrade
If you did one at a time it would be have to mess up,so i think your right bad crimp or loose nut?
|
07-23-2009, 05:00 PM | #3 |
Not Yet Wild
Join Date: Feb 2009
Location: Dallas, Texas
Posts: 59
|
Re: No Reverse after wire upgrade
Would WD40 prevent a connection? I sprayed some WD40 on one of the 4 motor connection because the nut would not come loose.
|
07-23-2009, 05:06 PM | #4 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: No Reverse after wire upgrade
WD-40 would have no effect on electrical connections.
Get a meter out and make your way through the connections on the FNR switch. |
07-23-2009, 05:08 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: No Reverse after wire upgrade
Did you use 2 wrenches when you took off the motor connections. I ask because if you dont hold the botton nut still with one wrench while you turn the top one you can spin the stud and shear the cable connection inside the motor.
P.S. WD40 is Highly Flammable and should not be used around any electrical connections.. |
07-23-2009, 05:15 PM | #6 |
doin it in the desert
Join Date: Dec 2008
Location: Sonora Desert,Az
Posts: 5,603
|
Re: No Reverse after wire upgrade
|
07-23-2009, 05:39 PM | #7 | |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: No Reverse after wire upgrade
Quote:
When you spray almost any aerosol it is flammable, even household flour will ignite if the powder/air ratio is right. WD-40 is regularly used to degrease parts and also to displace moisture in automobile ignition/electrical systems including alternators, generators and starters. Although it's not a very good lubricant, it is quite safe to use on electrical devices. |
|
07-23-2009, 05:40 PM | #8 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: No Reverse after wire upgrade
|
07-23-2009, 10:44 PM | #9 | |
Not Yet Wild
Join Date: Feb 2009
Location: Dallas, Texas
Posts: 59
|
Re: No Reverse after wire upgrade
Quote:
|
|
07-24-2009, 08:47 AM | #10 | |
Gone Wild
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
|
Re: No Reverse after wire upgrade
Quote:
|
|
Tags |
reverse, upgrade, wire |
|
|
Similar Threads | ||||
Thread | Forum | |||
00 DS No Reverse- But Warm S2 wire | Electric Club Car | |||
48V Upgrade/Reverse Buzzer | Electric EZGO | |||
new wire and OBC | Electric Club Car | |||
Lifted Cart Wire Upgrade | Lifted Golf Carts | |||
4ga wire IQ? | Electric Club Car |