|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-27-2008, 07:29 PM | #1 |
Not Yet Wild
Join Date: Apr 2008
Posts: 7
|
EZ GO starts then stops then just clicks.
I have a '02 EZ GO PDS cart 36V. I got it out this weekend it went about 100 ft then would not go again. You can hear the solinoid engage and motor will sometimes bouce a little but won't go. It can sit for a while and the same thing happens. Batteries have a fresh charge and all connections are good. I have put it on jack stands to trouble shoot and see no drop in battery voltage when engine is running BTW my batteries are reading 38V. Solinoid also checks out. I went through the troubleshooting flow chart and the problem I am seeing is the reading between F1 and F2 on the controller when the motor is turning is not the 2.7V indicated on the flow chart. The reading is only .2 volts. Also the motor does not sound as if the rpm is consistant. The flowchart says this may be a bad motor. My question is has anyone seen these symptoms before and can verify my findings? Also is this something that can be repaired if it is the motor or will it have to be replaced? Any help or direction would be appreciated. It will probably be a few days until I can work on the cart again.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-28-2008, 06:08 PM | #2 | |
Not Yet Wild
Join Date: Feb 2008
Posts: 20
|
Re: EZ GO starts then stops then just clicks.
Quote:
It sound to me like a battery. |
|
04-28-2008, 06:46 PM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: EZ GO starts then stops then just clicks.
a battery can show good with a volt meter but still have no amps so you need to load test them and check all cells with a hydrometer, i agree it sounds lkike you have a battery problem and it only takes one...........................
|
04-28-2008, 07:53 PM | #4 |
Not Yet Wild
Join Date: Apr 2008
Posts: 7
|
Re: EZ GO starts then stops then just clicks.
Thanks I will follow up testing the batteries properly this weekend.
|
05-01-2008, 08:43 PM | #5 |
Not Yet Wild
Join Date: Apr 2008
Posts: 7
|
Re: EZ GO starts then stops then just clicks.
Checked out the batteries with a hydrometer. Most of them were just marginal reading at the top of the fair range range right below good. I guess it is time for a new set. Does anyone have a recommendation on brands and a good place to buy.
|
05-05-2008, 09:37 PM | #6 |
Not Yet Wild
Join Date: Apr 2008
Posts: 7
|
Re: EZ GO starts then stops then just clicks.
Wasn't batteries after all. It was the throttle adjustment inside the pedal box. I got a tip from a friend that saved me from buying batteries.
|
05-06-2008, 04:31 PM | #7 |
Not Yet Wild
Join Date: Feb 2008
Posts: 20
|
Re: EZ GO starts then stops then just clicks.
thats weird because you said "You can hear the solinoid engage and motor will sometimes bouce a little but won't go" that ment you had power after the foot switch, so the foot switch had to be good, But if thats was the problem, then Im glad you found it before you purchased the batteries.
|
05-06-2008, 06:37 PM | #8 |
Not Yet Wild
Join Date: Apr 2008
Posts: 7
|
Re: EZ GO starts then stops then just clicks.
My footswitch is the type with the inductive coil that the shaft (magnetic?) from the peddle linkage moves through the center of. I guess when the switch that tells the controller you are pressing the pedal opened the rod was already entering the coil or too far in.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Cart clicks but want move... | Electric EZGO | |||
Rain is gone....now the fun starts | Lifted Golf Carts | |||
Cart temporarily stops after 2 blocks | Electric EZGO | |||
1997 DCS Project Starts | Electric EZGO |