08-18-2011, 08:20 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Location: West Palm Beach Fl
Posts: 16
|
92 gxi 804
I have a ezgo 92 gxi 804 with bad frame so I'm looking for a better frame to use. do I need to use a gxi frame or can I use a different model frame gas/electric any info would help thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-19-2011, 08:54 AM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 92 gxi 804
check the wheebase of your cart and compare it to a regular marathon. it may be a bit longer. if not. a gas marathon frame should work. does yours look like this? this is an 89 gxt 800.
|
08-19-2011, 01:04 PM | #3 |
Not Yet Wild
Join Date: Jun 2011
Location: West Palm Beach Fl
Posts: 16
|
Re: 92 gxi 804
Very similar mine just has different nose with lights and the body is all steal diamond plate like that one
|
08-19-2011, 01:29 PM | #4 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 92 gxi 804
sounds good. what engine? 2 cycle or 4. you might ask someone to measure their marathon for you if don't have own available to check. i have a frame here, but it's not at this house. you could get it but it would be prohibitive to ship.
|
08-19-2011, 03:58 PM | #5 |
Not Yet Wild
Join Date: Jun 2011
Location: West Palm Beach Fl
Posts: 16
|
Re: 92 gxi 804
It's a 4 cycle but I have a 18 Honda v-twin I want to put in it
|
08-19-2011, 04:16 PM | #6 |
Gone Wild
Join Date: Aug 2011
Location: West Central Illinois USA
Posts: 294
|
Re: 92 gxi 804
I have a 93 4 cly Marathon if you are needing measurements.
Mark |
08-19-2011, 04:28 PM | #7 |
Not Yet Wild
Join Date: Jun 2011
Location: West Palm Beach Fl
Posts: 16
|
Re: 92 gxi 804
That would be great thanks
|
08-19-2011, 04:32 PM | #8 |
Gone Wild
Join Date: Aug 2011
Location: West Central Illinois USA
Posts: 294
|
Re: 92 gxi 804
What ones do you want? ( from here to there)
Mark |
08-19-2011, 04:40 PM | #9 |
Not Yet Wild
Join Date: Jun 2011
Location: West Palm Beach Fl
Posts: 16
|
Re: 92 gxi 804
Front wheel to back wheel length & width
|
08-19-2011, 04:59 PM | #10 |
Gone Wild
Join Date: Aug 2011
Location: West Central Illinois USA
Posts: 294
|
Re: 92 gxi 804
Looks to be about 66" front to rear. Center of axle hub to hub.
Just a little over 29" from where the wheel rim starts to wheel rim. I'm not sure I have factory rims. Or do you want from center of wheel. |