|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-09-2012, 06:50 PM | #11 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 carb, what goes in this opening?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2012, 06:53 PM | #12 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 carb, what goes in this opening?
Remember, the pilot adjustment screw (air mixture) is to be screwed in till "lightly seated" then start with 1 1/2 turns out.
|
02-09-2012, 07:20 PM | #13 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
|
02-10-2012, 10:20 PM | #14 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Got it running, starts fine with no choke
|
02-11-2012, 05:38 AM | #15 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 carb, what goes in this opening?
i cant get my g1 to idle , did you adjust both of them 1 1/2 turns out? I did not know about adjusting that one, im still new at these carts, mines a 81 g1, i just put a good used motor in it, ive been trying to get the carb running good, im going to adjust that today , and ride , good post.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Opening up a Curtis 1238 AC controller? | Electric golf carts | |||
Opening a DCS Controller | Electric EZGO | |||
need used carb or carb parts (87 ezgo) | Golf Carts and Parts | |||
frame opening | Electric EZGO | |||
91 2 Cycle Carb Missing Carb Screw | Gas EZGO |