|
|
|
08-06-2017, 03:28 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Tomberlin -no power to dash
Got a 2009 emerge 500LE, no go,no power to dash,no solenoid click,nothing,,,I have checked fuses, help me😦
|
|
|
|
08-07-2017, 08:05 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Re: Tomberlin -no power to dash
See pics
|
|
|
|
|
08-11-2017, 08:51 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Re: Tomberlin -no power to dash
Talked to Tomberlin service tech, he advised me to check wiring harness, That was the problem, it was where Hall effect sensor wiring connects to main wire,RED wire was corroded, a common problem said by tech.As stated I was getting code 1-2 on the controller,no power to dash, no go,no solenoid click,
Got it fixed, will be replacing hall effect sensor(souped up ITS) while I have that part off. I received parts list and great customer service! Contact me if you need their number..... |
|
|
|
|
08-14-2017, 09:45 PM
|
#4 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,023
|
Re: Tomberlin -no power to dash
Very common issue
|
|
|
|
|
08-17-2017, 09:04 PM
|
#5 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Re: Tomberlin -no power to dash
Ordered Hall effect sensor,no instructions, texted service guy, he texted me thru it, Thought I will pass along this info, install sensor with connection toward rear of cart,had to switch red and blue wire,outside wires on connector,I used a straight pin to release,kinda tricky but possible,installed on cart,kinda jerky at first,but smoothed out,
*** Note,the Hall effect sensor that was originally on the 2009 emerge had circuit board separate from ITS,maybe this is why wires had to be switched... |
|
|
|
|
09-11-2017, 07:30 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Re: Tomberlin -no power to dash
I have a similar issue as I believe the service guy that replaced a corroded lead pulled the red wire from my DC converter loose. Does anyone have a detailed wiring schematic or picture of their converter wiring? Curious on who you texted as a technician, unfortunately I live in the midwest and nobody knows these out here.
|
|
|
|
|
09-11-2017, 10:34 PM
|
#7 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Re: Tomberlin -no power to dash
Email me
|
|
|
|
|
09-12-2017, 08:53 AM
|
#8 | |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 429
|
Re: Tomberlin -no power to dash
Quote:
|
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tomberlin Emerge goes 1/2 mile then loses power | Tomberlin | |||
| Tomberlin E2 Power Issue | Tomberlin | |||
| Tomberlin E Merge Dash Indicator lights | Tomberlin | |||
| Tomberlin Emerge Dash not turning off!!! | Tomberlin | |||
| Tomberlin non lighted dash board fix | Tomberlin | |||
Hybrid Mode