|
03-04-2012, 12:38 PM | #1 |
Not Yet Wild
Join Date: Mar 2012
Posts: 4
|
puller for the clutch ?
Trying to take apart my fe290 enigne and can not get the internal clutch off , i removed the out side cover and im having a hard time try to get this thing apart , please help
|
03-04-2012, 12:42 PM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: puller for the clutch ?
what internal clutch are you talking about?........................
|
03-04-2012, 07:36 PM | #3 |
Not Yet Wild
Join Date: Mar 2012
Posts: 4
|
Re: puller for the clutch ?
the clutch under the big metal cover
|
03-04-2012, 07:42 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: puller for the clutch ?
The whole unit is the clutch,you removed the outer-cover.You need the proper removal-tool that threads into the bolt-hole in the end of the crankshaft and pulls the clutch off.Any other type puller will damage the clutch beyond repair.The site-sponsors sell them very reasonable.
|
03-05-2012, 09:15 AM | #5 |
Not Yet Wild
Join Date: Mar 2012
Posts: 4
|
Re: puller for the clutch ?
how bout a link to the puller I need please ................
|
03-05-2012, 12:06 PM | #6 |
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
Re: puller for the clutch ?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
clutch puller | Gas Yamaha | |||
2pg clutch puller help | Gas EZGO | |||
g1 clutch puller | Gas Yamaha | |||
Clutch Puller G1 | Gas Yamaha | |||
G1 clutch removal. without puller? | Gas Yamaha |