06-14-2021, 02:15 AM | #1 |
Not Yet Wild
Join Date: May 2021
Posts: 25
|
Melex 252 Curtis controller 1204 bad?
I have a melex 252 from early 1990's.
It was working as usual, then one day i was putting it in reverse and it pushed the throttle and it only barely moved, didnt matter how much I pushed the throttle. I left the cart and the next day it was working as usual. The day after that I could go maybe 10 meters and then it stopped. Hasnt worked since. I* have measured all the microswitches and they seem fine(solenoid clicks when i push the throttle). *Potentiometer starts at 0k and when i push the throttle it goes seamlessly up to 5k. *F&R switch has been dissasembled, cleaned and measured and seems ok. *I have put a 12v battery directly to the motor and it runs fine. Yesterday I removed the Curtis controller since that seems to be the one thing left. It looked like this: Is there any test i can do with the controller out to see if it is ok? Do you think the corrosion(or whatever it is) could be the problem? Regards, |
Tags |
1204, corrosion, curtis |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
WTB Curtis Controller 1204 | Golf Carts and Parts | |||
Curtis Controller 1204-015 to 1204-017 | Electric Club Car | |||
Curtis 1204 Controller | Electric Club Car | |||
84 EZGO Curtis 1204 Controller from Melex | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts |