|
08-19-2009, 10:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2009
Location: O'Fallon, MO
Posts: 22
|
EZ GO MPT Speed
I am looking for some help. I am relatively new to this site (great resource) and I have read many post about how to adjust the governor. From the photos posted by ruredy I found the spring however the rod thru the spring is not threaded on mine? It appears to be facotry sealed (wire tie) and I have tried tightening the nut but the entire rod and spring turn with the nut? I did place a pair of vice grips on the compressed spring and YES it did run faster, but I am looking for some advice on how to do this correctly. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-19-2009, 10:37 PM
|
#2 |
|
Gone Wild
 Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: EZ GO MPT Speed
Cut the wire tie off and use a 3/8 deep socket on the nut. Hold the shaft with some vice grips...
|
|
|
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need more speed!!! | Electric EZGO | |||
| Need for speed | Electric Club Car | |||
| G1 speed help | Gas Yamaha | |||
| Need 4 speed | Extreme DC! | |||
| Need some SPEED | Lifted Golf Carts | |||
Linear Mode
