|
08-27-2009, 07:27 AM
|
#1 |
|
Gone Wild
Join Date: Dec 2007
Posts: 391
|
What is this wire??
sorry I don't have a picture. When working on the carb problem last week I found a white wire (possibly light grey) that comes off the front side of the motor on the right side of the carburetor. It has a female connect on it end.
any ideas what this wire is for? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-27-2009, 07:29 AM
|
#2 | |
|
****tard supreme
 Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: What is this wire??
Quote:
|
|
|
|
|
|
08-27-2009, 08:12 AM
|
#3 | |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: What is this wire??
Quote:
|
|
|
|
||
|
|
|
|
08-27-2009, 08:26 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2007
Posts: 391
|
Re: What is this wire??
is this something that I could easily add at this point? or hook to buzzer instead of light?
|
|
|
|
|
08-27-2009, 09:04 AM
|
#5 |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: What is this wire??
You could add it, if you wanted. It's not a needed item - Those EZGO motors don't normally use oil. It's very rare to have a cart that needs additional oil between oil changes. Your cart = your call. I'll have to see if there is an OEM oil light kit available as I've never added one or researched the accessory...
|
|
|
|
|
|
|
|
08-27-2009, 05:13 PM
|
#6 |
|
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: What is this wire??
The oil pressure sender is a N/C switch that provides the ground for the oil pressure light or buzzer. To wire it you come off the switched side of the solenoid to a light or buzzer, then to the sensor. It probably is sold as a fuel gage/oil light combo. They are mounted in the key switch plate in some stock applicatiions. It is a special order for freedom models.(my workhorse came with the combo)
|
|
|
|
|
08-31-2009, 08:21 AM
|
#7 |
|
Gone Wild
Join Date: Dec 2007
Posts: 391
|
Re: What is this wire??
just thinking about this some more. What impact does lifting the cart have on this sensor? Since my oil level doesn't read the same on the dipstick, I was wondering if that would also have an impact on how the pressure is reported?
|
|
|
|
|
08-31-2009, 08:26 AM
|
#8 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: What is this wire??
no affect, the sensor is controlled with oil pressure from the oil pump.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 4 ga wire | Electric EZGO | |||
| what ga. wire | Electric Club Car | |||
| new wire and OBC | Electric Club Car | |||
| 4ga wire IQ? | Electric Club Car | |||
| Is it bad if i have an extra wire? | Big Block Talk! | |||
Linear Mode
