|
09-03-2009, 04:47 PM
|
#1 |
|
Gone Wild
Join Date: Jun 2009
Location: BROOK PARK, OH
Posts: 194
|
Testing an ignitor UPDATE
Can this be done? I've checked the factory manual and there is nothing on this. Is there any way to test it other than swapping in another one?
Cart is a 99 TXT |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-03-2009, 04:55 PM
|
#2 |
|
****tard supreme
 Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Testing an ignitor
swapping them out is the only way. no testing procedure
|
|
|
|
|
09-03-2009, 05:05 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2009
Location: BROOK PARK, OH
Posts: 194
|
Re: Testing an ignitor
Wonderful. That's not exactly what I wanted to hear ya know
 I swapped out the pulsar coil, still didn't fire. Changed plugs and coils, (tested both, both ohmed ok) only thing I can think of is I must have fried the factory ignitor as well as the MSD. I can't think of anything left in the system that would cuase a no spark.  |
|
|
|
|
09-03-2009, 05:11 PM
|
#4 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Testing an ignitor
they do burn out from time to time.
|
|
|
|
|
09-03-2009, 05:13 PM
|
#5 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Testing an ignitor
you may be able to find a used one
 |
|
|
|
|
09-03-2009, 05:16 PM
|
#6 |
|
Gone Wild
Join Date: Jun 2009
Location: BROOK PARK, OH
Posts: 194
|
Re: Testing an ignitor
No time to hold out for a uesd one to show up. I need this cart at the track. It's not just a convience issue, My daughter drives a Jr dragster and they need to be towed through the pits. Not allowd to drive them except for on the track.
|
|
|
|
|
09-03-2009, 05:22 PM
|
#7 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Testing an ignitor
when do you need it? i can test one but not until tomorrow.
|
|
|
|
|
09-03-2009, 08:06 PM
|
#8 |
|
Gone Wild
Join Date: Jun 2009
Location: BROOK PARK, OH
Posts: 194
|
Re: Testing an ignitor UPDATE
Sorry PM. I left for Summit racing right after I posted my last post.
Picked up another MSD and did a quick wire in and WE HAVE SPARK  I'll have to finish putting it back together tomorrow after I get off work as I still have the cover and fan off and the plugs out but at least I now have spark at the plugs. It's kinda nice living only 45 min away from Summit  |
|
|
|
|
09-07-2009, 02:04 PM
|
#9 | |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 5
|
Re: Testing an ignitor UPDATE
Quote:
what is everyone talking about, msd. do they make one for a golf cart,(ezgo) |
|
|
|
|
|
09-07-2009, 02:05 PM
|
#10 |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 5
|
Re: Testing an ignitor
what do you mean msd is their a replacement msd for an ezgo?
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ignitor | Gas EZGO | |||
| ignitor | Gas EZGO | |||
| wtb ignitor | Golf Carts and Parts | |||
| Looking for a Ignitor 85 EZ-Go Gas | Golf Carts and Parts | |||
| Testing VR, Ignitor, coil, for 92 Marathon | Gas EZGO | |||
Linear Mode
